Commissioning work of 1 ton floor scale before weighing

        The 1 ton floor scale is a small floor scale. It is relatively common in the weighing industry or grain station. Its operation is simple and easy to learn, but it is more difficult to deal with its faults. Therefore, Chengbei Weighing Apparatus shared the 1 ton floor scale before weighing. Debugging work to reduce unnecessary failures.

When you turn on the electronic floor scale, it is best to let the product warm up for 15 minutes before debugging, and try to use the load as close as possible to the weight of the vehicle with the largest scale, and then the operator drives back and forth several times and brakes on the bearing platform. Tighten the high-strength bolts of each load cell with a torque wrench to prevent various failures. The operator uses a digital voltmeter to measure the output voltage of each load cell of the 1 ton platform scale in order to check whether the various data are consistent. If there is any inconsistency, the corresponding two precision adjustable resistors in the junction box can be adjusted separately to reduce the difference between each other. Then test again.

　　 1 ton floor scale

Note: The operator must pay attention to the rotation direction of the two adjustable resistors and the same rotation amount. When turning clockwise, the resistance decreases, the output voltage becomes larger, and the display value increases. Otherwise, it will be adjusted to the electronic The electronic platform scale has the same output of each load cell, and it can stop.

　　 After checking that each data is consistent, be sure to refer to the electronic platform weighing display manual (professional technical manual) to check the correctness of various function keys to improve the weighing accuracy of the electronic platform to avoid error prompts in the third step;

After the 1 ton platform scale has been adjusted and adjusted, add the weight equivalent to the maximum weight to the weighing platform of the electronic platform evenly. According to the positions and methods described in the manuals of various weighing indicators, the displayed value is consistent with the weight After that, remove the weight and confirm that the empty scale displays "0".

Note: We can also divide the adjusted electronic platform scale into several parts for maximum weighing, but each part must include the minimum weighing capacity, maximum weighing capacity and each weighing point for which the tolerance is changed. 1 ton platform scale is required The weighing error of each point is not greater than the maximum allowable error requirement of each measuring point, otherwise the weighing will still be inaccurate when weighing. This point needs everyone's attention!

　　Changzhou Chengbei Weighing Apparatus 1 ton weighing scale manufacturer's finishing is the above content. For more information, please pay attention to our website.